The Role of Polarization in Photocatalysis

Semiconductor photocatalysis as a desirable technology shows great potential in environmental remediation and renewable energy generation, but its efficiency is severely restricted by the rapid recombination of charge carriers in the bulk phase and on the surface of photocatalysts. Polarization has emerged as one of the most effective strategies for addressing the above‐mentioned issues, thus effectively promoting photocatalysis. This review summarizes the recent advances on improvements of photocatalytic activity by polarization‐promoted bulk and surface charge separation. Highlighted is the recent progress in charge separation advanced by different types of polarization, such as macroscopic polarization, piezoelectric polarization, ferroelectric polarization, and surface polarization, and the related mechanisms. Finally, the strategies and challenges for polarization enhancement to further enhance charge separation and photocatalysis are discussed.     

Synthesis of γ-(Arylamino)butyric Acid Derivatives via Ring-Opening Addition of Arylamines to Cyclopropane-1,1-Dicarboxylates

Russian Journal of Organic Chemistry - A rapid and efficient catalytic approach has been proposed for the synthesis of dimethyl 2-[2-(aryl-amino)but-3-en-1-yl]- and...     

Heterogeneous copper‐catalyzed oxidative coupling of oxime acetates with sodium sulfinates: An efficient and practical synthesis of β‐keto sulfones

An efficient and practical route to β‐keto sulfones has been developed through heterogeneous oxidative coupling of oxime acetates with sodium sulfinates by using an MCM‐41‐supported Schiff base‐pyridine bidentate copper (II) complex [MCM‐41‐Sb,Py‐Cu (OAc)₂] as the catalyst and oxime acetates as an internal oxidant, followed by hydrolysis. The reaction generates a variety of β‐keto sulfones in good to excellent yields. This new heterogeneous copper (II) catalyst can be easily prepared via a simple procedure from readily available and inexpensive reagents and exhibits the same catalytic activity as Cu (OAc)₂. MCM‐41‐Sb,Py‐Cu (OAc)₂ is also easy to recover and is recyclable up to eight times with almost consistent activity.     

CoNi-embedded nitrogen-enriched porous carbon framework for long-life lithium–sulfur batteries

Journal of Solid State Electrochemistry - Metal–organic framework (MOF) derivatives are excellent energy storage devices such as lithium–sulfur batteries. Here, a bimetallic...     

Entropic effect implication for change in polymer coils swelling state in the demixing enthalpy recovery of aqueous poly(vinyl methyl ether) solutions

Time‐dependent demixing enthalpy recovery behavior of aqueous poly(vinyl methyl ether) (PVME) solutions exhibits distinct recovery characteristics in three concentration regions. The absence of recovery behavior below a water concentration of 38.3 wt % indicates that the PVME coil is in a globular state. The typically sigmoidal recovery behavior of demixing enthalpy above 38.3 wt % is ascribed to the reswelling of the collapsed polymer coils induced by the entropic effect. The increase in difference between the upper and lower limits indicates the continued swelling of the PVME coils. Above 65 wt %, a dominant diluting effect can be observed, and a much longer phase separation time is needed to reach the expected lower limit. In contrast, the recovery of demixing enthalpy in a wide range of water concentration (from 38.3 to 90 wt %) exhibits the same feature. The infrared spectroscopy results are in agreement with the above macroscopic differential scanning calorimetry results. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 142–151     

In vitro anticomplementary activity and quality evaluation of dried blossoms of Inula nervosa Wall. from different geographical origins

Blossoms of Inula nervosa Wall. (BINW) are traditionally used as an analgesic and antitussive in China. In this study, in vitro anticomplementary activities of crude extract from BINW in 21 batches and of extracts of four monomeric compounds were evaluated by the classical pathway. The effect of the region of origin on the quality of BINW was evaluated by fingerprint analysis for the first time. Furthermore, chemometric methods including similarity analysis and principal component analysis were employed to evaluate the quality of BINW. The nine major monomeric compounds were quantitated by ultra‐high‐performance liquid chromatography. All nine analytes demonstrated excellent linearity with recoveries ranging from 97.25% to 102.76%. The limits of detection and quantification were 0.07–12.20 μg/mL and 0.22–40.27 μg/mL, respectively. Results indicate that different regions of origin have a significant effect on the quality of BINW. Fingerprint analysis in combination with chemometrics and multi‐ingredient determination is an efficient and reliable approach for quality evaluation. The BINW samples from Yunnan had the highest ratio of 1,5‐dicaffeoylquinic acid and thymol; they also exhibited significantly higher anticomplementary activity than those from three other areas. This study successfully established a rapid and efficient method to evaluate the quality and biological activity of BINW.     

Pharmacokinetic analysis of plasma bicyclol by liquid chromatography–tandem mass spectrometry

Bicyclol is a synthetic drug widely used to treat chronic hepatitis B. This study aimed to develop a selective, sensitive and high‐throughput liquid chromatography–tandem mass spectrometric method for the detection of bicyclol in human plasma. Bicyclol was detected using a multiple reaction monitoring mode, with ammonium adduct ions (m/z 408.2) as the precursor ion and the [M‐CH₃]⁺ ion (m/z 373.1) subjected to demethylation as the product ion. Chromatographic separation was achieved using a Zobax Eclipse XDB‐C₁₈ column with a gradient elution and a mobile phase of 2 mm ammonium formate and acetonitrile. Bicyclol was extracted from plasma matrix by precipitation. A linear detection response was obtained for bicyclol ranging from 0.500 to 240 ng/mL, and the lower limit of quantification was 0.500 ng/mL. The intra‐ and inter‐day precisions were all ≤7.4%, and the accuracies were within ±6.0%. The extraction recovery was >95.9%, and the matrix effects were between 96.0% and 108%. Bicyclol was found to be unstable in human plasma at room temperature, but the degradation was minimized by conducting sample collection and preparation in an ice bath. The validated method was successfully applied to investigate the pharmacokinetics of bicyclol tablets in six healthy Chinese volunteers.     

New lower bounds on the radius of spatial analyticity for the KdV equation

The radius of spatial analyticity for solutions of the KdV equation is studied. It is shown that the analyticity radius does not decay faster than $t^{?1/4}$ as time t goes to infinity. This improves the works of Selberg and da Silva (2017) [30] and Tesfahun (2017) [34]. Our strategy mainly relies on a higher order almost conservation law in Gevrey spaces, which is inspired by the I-method.     

Size effect of lead-free halide double perovskite on luminescence property

Lead-free halide double perovskites have gathered wide scientific interest since they are environmentally friendly and stable.However,compared to the lead perovskites,their optoelectronic properties are compromised.Herein we report a series of bulk lead-free mixed Bi-In halide double perovskites:Cs_2AgBi_(1-x)In_xCl_6(0x1).The Cs_2AgBi_(0.125)In_(0.875)Cl_6breaks the parity-forbidden transition and retains direct band gap structure,having warm-white light emission,with photoluminescence quantum efficiency(PLQE)of 70.3%,much higher than the PLQE of reported lead perovskite materials.Its exciton self-trapping dynamics is investigated.Meanwhile,the Cs_2AgBi_(0.125)In_(0.875)Cl_6nanocrystals and Cs_2AgBi_(0.125)In_(0.875)Cl_6microcrystals can be synthesized by modified hot injection and rapid cooling crystallization,respectively.The size effect of Cs_2AgBi_(0.125)In_(0.875)Cl_6is studied on the photoluminescence(PL)property.Additionally,the bulk material exhibits excellent stability on exposure to light,humidity and air for more than 3 months.It is a promising candidate as highly efficient warm white-light emitting material for road lighting.     

Solid-State NMR Spectroscopy: A Powerful Technique to Directly Study Small Gas Molecules Adsorbed in Metal–Organic Frameworks

Metal–organic frameworks (MOFs) have shown great potential in gas separation and storage, and the design of MOFs for these purposes is an on-going field of research. Solid-state nuclear magnetic resonance (SSNMR) spectroscopy is a valuable technique for characterizing these functional materials. It can provide a wide range of structural and motional insights that are complementary to and/or difficult to access with alternative methods. In this Concept article, the recent advances made in SSNMR investigations of small gas molecules (i.e., carbon dioxide, carbon monoxide, hydrogen gas and light hydrocarbons) adsorbed in MOFs are discussed. These studies demonstrate the breadth of information that can be obtained by SSNMR spectroscopy, such as the number and location of guest adsorption sites, host–guest binding strengths and guest mobility. The knowledge acquired from these experiments yields a powerful tool for progress in MOF development.